Technologies / Solutions
The systems we install
We install every type of waterproofing to the project engineer’s specification — sheet membrane, liquid, torch-on, epoxy, waterstops and joint sealing. Each technology links to the real objects where we performed it.
Sheet Membrane (PVC / TPO)
Factory-made single-ply sheet, hot-air welded into one continuous membrane
Single-ply thermoplastic sheet — PVC (polymer-modified vinyl, plasticised) or TPO (thermoplastic polyolefin) — manufactured to a controlled thickness, typically 1.2–2.0 mm, usually with a polyester reinforcement scrim or a fleece backing. The sheets are rolled out on site and joined by hot-air welding: the overlap is heated to its melting point and pressed, so the two sheets fuse into a single homogeneous material. The seam is not an adhesive joint — it is a weld, and it can be probe-tested and, where required, air-pressure tested along its length. Because the sheet arrives at full thickness from the factory, the finished membrane does not depend on wet-film build, weather during cure, or coats being applied evenly.
Where we use it
Liquid Membranes
Seamless systems for complex detail
Cold-applied liquid membranes that cure to a continuous, jointless barrier — used to spec where geometry, detailing or the engineer’s specification call for them.
Where we use it
Epoxy Systems
Chemical- and wear-resistant barriers
Epoxy-based coatings and screeds installed to specification where chemical resistance or a hard-wearing surface is required.
Where we use it
Waterstops & Hydro-Seals
PVC waterstops cast into joints between concrete pours
PVC waterstops (PVC-Waterstop) are extruded profiles of flexible, plasticised PVC — typically orange or blue — that are cast directly into the concrete at the joints between separate pours: wall-to-slab junctions, kicker joints, pour breaks and movement joints. The profile has ribbed anchoring flanges that lock mechanically into the concrete on both sides of the joint, so water tracking along the joint plane meets a continuous physical barrier embedded in the structure itself. Profiles are made in two families: internally placed waterstops set in the middle of the section, and externally placed (rearguard) waterstops fixed to the formwork on the wet face. Movement-joint profiles include a central hollow bulb that lets the joint open, close and shear without tearing the barrier. Because the waterstop becomes part of the concrete, it protects the joint for the design life of the structure — it cannot debond, age off or be washed out the way surface-applied sealing can.
Where we use it
Combiflex
Engineered joint-sealing system for high-movement joints and cracks
The Sikadur-Combiflex® SG system is a high-performance joint-sealing system for construction, expansion and connection joints, and for sealing cracks in concrete structures. It consists of a flexible waterproofing tape of modified flexible polyolefin (FPO), 1.0 or 2.0 mm thick, bonded to the structure on both sides of the joint with a Sikadur® epoxy adhesive. The tape’s advanced-adhesion surface bonds directly to the epoxy without on-site activation, adheres to dry and matt-damp concrete, and remains permanently elastic — so the sealed joint can accommodate significant, repeated movement in multiple directions while staying watertight. The system is chemically resistant and is approved for use in contact with potable water, which makes it suitable for water-retaining structures as well as below-grade construction.
Where we use it
Torch-On Membrane
Bitumen sheet, torch-applied
Modified-bitumen sheet membrane bonded to the substrate with an open flame — a proven system for roofs, podiums and planter boxes where the specification calls for it.
Where we use it
Joint Sealing
Elastic sealants at every transition
Polyurethane and hybrid sealants applied at expansion joints, penetrations and transitions to complete a watertight system.
Where we use it
Manufacturer accreditations
“Systems we install / manufacturer-trained on” — not partnerships. Material systems we work with include Soprema, Fatra, ARDEX and Sika.